25
7.11.4. Leave the Multi-purpose valve knob in the Exhaust / Dry
position.
7.11.5. Now reset the Timer for drying, 20 – 30 minutes, the Dry
Light will come on indicating that Drying is active and the
Heating Elements are back on.
7.11.6. When the Timer reaches 0 min the drying is complete and
the Dry Light and Heating Elements will turn off.
7.11.7. Now turn the Multi-purpose valve to the off position “0” and
open the door to remove the instruments.
Warning
Multi-purpose valve knob should be turned in a clockwise direction only.
7.12. At the end of the day turn the Start / Stop rocker switch to the STOP
position.
To Next Page
Loading...
