- 15 -
Operation steps:
1. Read existing files
1) Use ▲ and ▼ keys to choose files. Or Input numbers to choose corresponding file, and then press [OK]
key to confirm.
2) Use ◄ and ► keys o choose pages.
2. Save parameter to files
1) Move cursor to file number. Press [STORE] softkey to save parameter to the selected file.
2) Press [YES] softkey to continue, or press [NO] softkey to cancel operation.
3) If press [YES] softkey in step 2, input file name via numeric keys and then press [OK] to confirm. If the
file name already exists, press [Continue] softkey to cover the existing file of press [ESC] to cancel
operation.
3. Upload parameters from existing files
1) Press [File] key to switch to internal or external files list.
2) Move cursor to the file name to be uploaded from, or input file name directly.
3) Press [LOAD] softkey.
4) Press [YES] softkey to upload file.
4. Copy file to USB flash disk
1) Plug USB flash disk into USB host.
2) Move cursor to the file name to be copied, or input file name directly.
3) Press [YES] softkey to copy.
4) If the file name already exists, press [Continue] softkey to cover the existing file of press [ESC] to cancel
operation.
To Next Page
Loading...
Need help?
General