- 17 -
3-2-3. Accuracy of Q
The accuracy Qe of Q is calculated according to:
Qx: Measured value of Q.
De: Accuracy of D.
The above formula is valid only when
3-2-3. Accuracy of θ
The accuracy θe of θ is calculated according to:
[deg]
3-2-4. Accuracy of Rp
When Dx (the measured value of D) ≤0.1, the accuracy of Rp is calculated according to:
[Ω]
Rpx: Measured value [Ω] of Rp.
Dx: Measured value of D.
De: Accuracy of D.
3-2-5. Accuracy of R
s
When Dx (the measured value of D) ≤0.1, the accuracy of Rs is calculated according to:
[Ω]
Xx: Measured value [S] of X.
Cx: Measured value [F] of C.
Lx: Measured value [H] of L.
De: Accuracy of D.
f: Measured frequency.
To Next Page
Loading...