S1846 Tsunami ATX
5
INTRO
products along with FAQs, distributors list, drivers, and BIOS setting explana-
tions.
Icons
In order to help you navigate this manual and set up your system, we have
added several icons to our format.
This icon alerts you to particularly important details regarding the
setup or maintenance of your system. This icon often appears next
to information that may keep you from damaging your board or
system. While we will often point out the most vital paragraphs in a
chapter, you should always read every word in the text. Failing to do so can
lead to exasperation and expense.
Wherever possible, we have included step-by-step instructions for
setting up your system, which are indicated by this icon. However, it
is in your best interest to read an entire section (and perhaps the
entire manual) before you begin to fiddle with your motherboard.
While we have alerted you to potential dangers in several places in
the manual with this icon, these warnings should not be regarded as
the whole of your safety regimen. Never forget that computers are
electrical devices, and are capable of delivering a shock. Prevent damage to
yourself and to your board: always ensure that your system is turned off and
unplugged whenever you are working with it, and that you are equipped with a
static safety device.
Hardware Specifications/Features
Processor Information •One SEC slot (Slot One type)
•66MHz to 100MHz bus support
(BIOS selectable)
•Pentium II 233-450MHz
•Supports Celeron CPUs
Chipset Information •Intel 440BX AGPset
•Intel PIIX4e controller
!
important!
procedure
1.
2.
3.
warning
To Next Page
Loading...
