TYAN S1846 - Displayed Error Messages

http://www.tyan.com
76
egasseMrorrEnoitanalpxE
rorrE02A-etaG2408 .2408ehtecalpeR.gnikrowtonsi)2408(rellortnocdraobyekehtno02AetaG
!trohSeniLsserddA.yrtiucricgnidocedsserddaehtnirorrE
rorrEevirD:C
drah:CehtkcehC.ytilitUksiDdraHgaiDIMAehtnuR.:CevirdmorfesnopseroN
.puteSdradnatSniepytksid
eruliaFevirD:C.evirdehtecalpeR.:CevirdksiddrahmorfesnopseroN
,daByromeMehcaC
!ehcaCelbanEtoNoD
.gaiDIMAnuR.evitcefedsiyromemehcaC
rorrEremiT2-HC.2remitnirorrenasierehT.sremitowtsahmetsysTAnA
etatSyrettaBSOMC
woL
ehtecalpeR.wolsirewopyrettabehT.yrettabaybderewopsiMARSOMC
.yrettab
muskcehCSOMC
eruliaF
.puteSSOIBNIWnuR.eulavsuoiverpehtnahttnereffidsimuskcehcMARSOMC
metsySSOMC
teStoNsnoitpO
.puteSSOIBNIWnuR.deyortsedneebevahMARSOMCniderotsseulavehT
epyTyalpsiDSOMC
hctamsiM
SOIBNIWnuR.detcetedepytehthctamtonseodMARSOMCniepytoedivehT
.puteS
eziSyromeMSOMC
hctamsiM
SOMCnitnuomaehtnahttnereffidsiSOIBIMAybdnuofyromemfotnuomaehT
.puteSSOIBNIWnuR.MAR
etaDdnaemiTSOMC
teStoN
.emitdnaetadehttesotputeSdradnatSnuR
rorrEevirD:D
drahehtkcehC.ytilitUksiDdraHgaiDIMAehtnuR.:DevirdmorfesnopseroN
.puteSdradnatSniepytksid
Displayed Error Messages
If an error occurs after the system display has been initialized, the error
message will be displayed as follows:
ERROR Message Line 1
ERROR Message Line 2
Press <F1> to continue
and the system will halt. The system will not halt if the Wait for <F1> If Any
Error option in Advanced Setup is Disabled.
RUN SETUP UTILITY
may also appear. Press <F1> to run WINBIOS Setup if this message appears.
Chapter 6
System Resources