TYAN S1846 - Power Management Setup

http://www.tyan.com
52
Chapter 4
BIOS Configuration
Power Management Setup
The AMIBIOS Setup options described in this section are selected by
choosing Power Management Setup from the AMIBIOS Setup main menu.
Fail-Safe Default Optimal Default
ACPI Aware O/S No No
Power Management/APM Enabled Enabled
Power Button Function On/Off On/OFf
Green PC Monitor Power State Stand By Suspend
Video Power Down Mode Disabled Suspend
Hard Disk Power Down Mode Disabled Suspend
Hard Disk Time Out (Minute) Disabled Disabled
Power Savng Type Sleep Sleep
Standby/Suspend Timer Unit 4 min 4 min
Standby Time Out Disabled Disabled
Suspend Time Out Disabled Disabled
Slow Clock Ratio 50%-62.5% 50%-62.5%
Display Activity Ignore Ignore
Device 6 (Serial port 1) Monitor Monitor
Device 7 (Serial port 2) Monitor Monitor
Device 8 (Parallel port) Monitor Monitor
Device 5 (Floppy disk) Monitor Monitor
Device 0 (Primary master IDE) Monitor Monitor
Device 1 (Primary slave IDE) Monitor Monitor
Device 2 (Secondary master IDE) Monitor Monitor
Device 3 (Secondary slave IDE) Monitor Monitor
LAN Wake-up Disabled Disabled
PC98 Power LED Disabled Disabled
Fan OFF at Suspend Enabled Enabled
RTC Wake-Up Disabled Disabled
**Hour N/A N/A
**Minute N/A N/A
** Setting is not Selectable
ACPI Aware O/S
Set this option to Yes to enable Advanced Configuration and Power Interface
(ACPI) BIOS for an ACPI-aware operating system.
Power Management/APM
Set this option to Enabled to enable the chipset power management and APM
(Advanced Power Management) features. The settings are Enabled or Dis-
abled.