TYAN S1846 - PCI;PnP Setup

http://www.tyan.com
56
Chapter 4
BIOS Configuration
PCI/PnP Setup
Choose PCI/Plug and Play Setup from the AMIBIOS Setup screen to display
the PCI and Plug and Play Setup options, described below.
Fail-Safe Default Optimal Default
Plug and Play Aware O/S Yes Yes
PCI Latency Timer (PCI Clocks) 64 64
PCI VGA Palette Snoop Disabled Disabled
Allocate IRQ to PCI VGA Yes Yes
PCI IDE BusMaster Disabled Disable
OffBoard PCI IDE Card Auto Auto
**OffBoard PCI IDE Primary IRQ Disabled Disabled
**OffBoard PCI IDE Secondary IRQ Disabled Disabled
PCI Slot1 IRQ Priority Auto Auto
PCI Slot2 IRQ Priority Auto Auto
PCI Slot3 IRQ Priority Auto Auto
PCI Slot4 IRQ Priority Auto Auto
DMA Channel n PnP PnP
IRQ3 PCI/PnP PCI/PnP
IRQ4 PCI/PnP PCI/PnP
IRQ5 PCI/PnP PCI/PnP
IRQ7 PCI/PnP PCI/PnP
IRQ9 PCI/PnP PCI/PnP
IRQ10 PCI/PnP PCI/PnP
IRQ11 PCI/PnP PCI/PnP
IRQ14 PCI/PnP PCI/PnP
IRQ15 PCI/PnP PCI/PnP
Reserved Memory Size Disabled Disabled
**Reserved Memory Address C8000 C8000
PCI Device Search Order First-Last First-Last
BIOS Devnode for Shadow RAM Disable Disabled
** Setting is not Selectable
Plug and Play Aware O/S
Set this option to Yes to inform AMIBIOS that the operating system can
handle plug and Play (PnP) devices. The settings are No or Yes.
PCI Latency Timer (PCI Clocks)
This option specifies the latency timings (in PCI clocks) for PCI devices
installed in the PCI expansion slots. The settings are 32, 64, 96,