(2) Operation of PTO ON/OFF
button switch
Operation for 'automatic' and 'man-
ual' positions of the PTO selection
switch is as follows :
「
ON
」
When pressing the switch, the
red lamp comes on and the PTO
shaft rotates.
「
OFF
」
When pressing the switch again,
the lamp goes off and the PTO
shaft stops rotating.
T4NO220A
PTO ON/OFF
Switch
T4NO219A
I N D E P E N D E N T P T O
OPERATION SWITCH
(1) Operation of PTO selection
switch
「
OFF
」
- The PTO shaft is stopped.
「
Automatic
」
-
When the implement is lifted to
the preset height, the PTO shaft
is automatically stopped.
「
Manual
」
-
The rotating status of the PTO
shaft can be controlled by operat-
ing the PTO ON/OFF switch to
the ON/OFF position manually.
►
(13) Engine warning lamp
It comes on when the engine is
malfunctioning.
Engine warning lamp
When Engine warning lamp is
it, ensure that you operator the
tractor only after the engine
RPM reaches at the normal
speed. If this instruction is not
kept, it may cause a perfor-
mance degradation or accident
due to a system error.
•
CAUTION
To Next Page
Loading...
