③
Open the hood and check:
- Engine oil level
- Coolant level
- Fan belt for looseness and
damage
④
Sit on the driver's seat, turn
the main switch to the "ON"
position and check:
- Fuel gauge for proper op-
eration
- Fuel level
- E n gi n e o i l an d c h a r g e
warning lamps for blinking
operation
- Turn signal lamp
- Horn operation
- Brake pedal free play
- Clutch pedal play
⑤
Start the engine, drive the
tractor slowly and check:
- Emission color
- Brake pedal operation
- One brake pedal operation
- Steering wheel for heavi-
ness and vibration
- Coolant gauge operation
- Hydraulic operation of 3-point
link
3.
INSPECTING AND CHANGING COOLANT
ENGINE COOLANT INSPECTION
AND CHANGE
(1) Inspection
Open the radiator cap and check
that the radiator is filled with cool-
ant up to its filler inlet. If the coolant
amount is insufficient, add more
coolant.
►
Do not open the cap when the
engine is hot. Otherwise, hot
steam can burn you seriously.
Wait until the engine is suffi-
ciently cooled down.
•
WARNING
T4HO505A
Inlet
Radiator
Check hoses
To Next Page
Loading...
