EasyManua.ls Logo

TYM T394C - Cautions for Driving into; out of Field; Loading to; Unloading from Truck

TYM T394C
185 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPERATION
3 - 7
3
3
9.
CAUTIONS FOR DRIVING INTO / OUT OF FIELD
(1) Check that the left and right brake pedals are connected.
(2) It is dangerous to drive into/out of a eld if the eld is deep from its bank.
Use ramps.
(3) Move in the perpendicular direction to the bank.
(4) When driving out of the eld, lower the implement so that the front wheels
cannot be lifted.
(5) It is recommended to drive into a eld backward to utilize full power.
Be careful to keep the tractor's balance when working on a slope. The
tractor may become out of balance and roll over.
It is very dangerous to ride a person as a front weight.
WARNING
For detailed precautions, refer to the page 0-23.
(1) When loading the tractor onto a truck, drive backward.
(2) Be extra careful when using ramps.
(3) If the engine stops on ramps, depress the brake pedals immediately and
release them slowly to move onto the ground. Then, start the engine again
to climb the ramps again.
10. LOADING TO / UNLOADING FROM TRUCK
When the needle on the coolant
temperature gauge is pointing
at 'H,' the engine is overheated.
If running the engine under
this condition continuously, the
engine parts can be severely
damaged. Make sure to take an
appropriate action immediately.
NOTE
T474NCUSM1-영문-03(다).indd 7 2019-02-18 오후 3:25:34

Table of Contents

Related product manuals