TYM T394C - Speed Control Knob

DESCRIPTION OF TRACTOR CONTROLS
2 - 28
IMPLEMENT LIFT CONTROL
SYSTEM
(1) Position lever
This lever is used to lift and lower
an implement to a certain working
height freely and maintain it.
<Operation>

「
Lifting implement
」
Pull the lever back to lift the im
-
plement.

「
Lowering implement
」
Push the lever forward to lower
the implement.
►
T39O322A
Position lever
DOWN
UP
When leaving the tractor, make
sure to lower the implement and
stop the engine. Others may
operate one of the controls,
leading to a dangerous situa-
tion.
•
WARNING
HY DR AU LI C L OW ER IN G
SPEED CONTROL KNOB
This can be used to adjust the low-
ering speed of the implement.
Adjust the lowering speed according
to the implement type and working
environment.
<Operation>
Rotavator - Slow the lowering
speed.
Plow - Speed up the lowering
speed.
►
•
•
T253O226B
Hydraulic Lowering
Speed Control Knob
T474NCUSM1-영문-02(나).indd 28 2019-03-04 오후 2:05:40