(2) Changing
Unscrew the drain plug on the
lower section of the engine to
drain contaminated engine oil.
Since hot oil flows out of the en-
gine first, be careful not to get
burnt.
After draining oil, tighten the en-
gine oil drain plug.
Add the specified amount of the
specified engine oil through the
filler hole.
4. CHECKING AND CHANGING OIL
CHECKING AND CHANGING
ENGINE OIL
(1) Inspection
① Pull out the dipstick, wipe its tip
and insert it again. Then, pull it out
and check that the oil level is be-
tween the upper and lower limits.
② If insufficient, add oil.
►
T39O506A
Engine oil
gauge
T254O508A
Engine oil
gauge
Upper limit
Engine oil
cartridge
T39O507A
Drain plug
Lower limit
To Next Page
Loading...
