To Next Page

To Previous Page

1 - 7

GENERAL INFORMATION

3. SAFETY SIGNS



In order to work with the machine safely, safety decals are placed on the machine.



Make sure to read and follow the directions.

■ Keep the safety decals clean and not damaged at all times.

If a safety decal on the machine is dirty, wash it with soapy water and wipe it off with a soft cloth.

Never use solution as thinner or acetone because these can erase characters or pictures.

■ If washed with high-pressured water, a decal may be peeled off.

Do not apply high-pressured water directly onto decals.

■ If a safety decal is damaged or lost, order a new one immediately and place it on

the machine.

When putting a new decal, wipe off the place to post the decal thoroughly and wait till it is dried. Then post

the decal.

Each decal has a part number on the bottom.

■ When replacing a part attached with a decal with a new part, replace the decal as

well.

T474NH-영문-01B(가).indd 7 2019-03-06 오전 10:17:59

Questions and Answers:

Need help?

Do you have a question about the TYM T474 and is the answer not in the manual?

TYM T474 Specifications

General