3. cautIonS durIng the work
Do not load anything that can interfere driving.
- Always keep the driver’s seat clean.
Always buckle up when driving.
Opening radiator cap when heated can spring out the
steam to have the operator burned. Open the cap af-
ter it is sufciently cooled down.
Do not drive with depressing the differential gear pedal.
Prohibit anyone to get on the machine.
- Prohibit anyone to get on the machine other than
the designated place.
-
Even thought there are some designated place, do
not let people more than capacity get on the machine.
- Never let any passenger mount on the machine.
Also, do not put any object on the machine. Keep
people away from the machine.
- Do not jump on/off the operating machine except for
emergency.
Be cautious not to let anyone touch the belt . Always
check the connected area of belt.
When two people are working collaboratively, ex-
change signals each other.
Prevent injury
- Do not touch power transmission gear, rotating unit,
and other dangerous parts.
- Pay special attention if you are working with the ma-
chine with blade or sharp projection
- Be careful not to injure from the work where soils
and stones are scattered around.
Safety in inspection, adjustment, etc.
- Make sure to stop the motor and carry out the work
in a safe environment.
-
When leaving the machine for a break, or other rea-
son, leave the machine in a safe place and descend
the working unit to keep them in a safe stopped state.
Removing and installing should be carried out in a
safe place and with a safe method.
Do neither stay nor insert foot under the working units.
To Next Page
Loading...
Need help?
General
