EasyManua.ls Logo

TYM T474 - 6. Turning in Field; 7. Stopping and Parking

TYM T474
175 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
OPERATION
3 - 5
3
3
6. TURNING IN FIELD
To turn in a field, release the
hook for the left and right brake
pedals.
Turn the steering wheel and
depress the brake pedal for the
desired direction.
While turning, keep the engine
speed low and turn slowly.
Avoid turning at a high speed.
The tractor can fall on its side.
When the tractor is installed
with an implement, its overall
length becomes large. Be extra
care with other people and ob-
jects around when turning.
Connect the left and right brake
pedals when it is about to drive.
WARNING
T39O401A
Interlock
Raise: Open
7. STOPPING AND PARKING
Operate the throttle lever to set
the engine at a low speed.
Release the forward driving (HST
type) and accelerator (mechani-
cal) pedals slowly. Depress the
brake pedals for abrupt braking.
When the vehicle is completely
stopped, set the shift lever in the
neutral position.
Apply the parking brake.
If an implement is attached to the
vehicle, lower it.
T4HO301B
T474NH-영문-03(다).indd 5 2019-03-06 오전 9:36:45

Table of Contents

Related product manuals