EasyManua.ls Logo

TYM T474 - 4. Hydraulic System

TYM T474
175 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8 - 7
TROUBLESHOOTING
8
7
6
43
8
4. HYdRaULIc SYSTEM
TROUBLE PROBaBLE caUSE SOLUTION
Hydraulic system
Oil leaks from the pipe
or hose
Loose clamp
•
Tighten
•
Cracked pipe
•
Have it replaced by workshop
•
The hydraulic pressure
won't be decreased
Lowering speed control lever xed to stop position
•
Set it to the lowering position
•
Defective valve
•
Have it repaired by workshop
•
Damaged cylinder
•
Have it repaired by workshop
•
Damaged and seizured lift shaft rotating part
•
Have it repaired by workshop
•
The hydraulic pressure
won't be increased
Insufcient engine RPM
•
Set the speed to 1000 to 1500 RPM
•
Insufcient transmission uid
•
Add to the specied level
•
Air sucked into suction pipe
•
Tighten the connection. If any pipe or hose is
cracked or O-ring is damaged, replace it
•
Clogged oil lter
•
Clean
•
Defective hydraulic pump
•
Have it repaired by workshop
•
Defective valve
•
Have it repaired by workshop
•
Damaged cylinder
•
Have it repaired by workshop
•
T474NH-영문-08(아).indd 7 2019-03-06 오전 10:05:57

Table of Contents