④ Run the engine for approx. 5
minutes and check for proper
operation through the engine oil
warning lamp. Then, stop the
engine.
(This warning lamp should be
turned off while the engine is
running.)
⑤ Check the oil level with the dip-
stick again. If still insufficient,
add more.
REPLACING ENGINE OIL
FILTER CARTRIDGE
① Remove the engine oil filter car-
tridge by turning it counterclock-
wise with a wrench.
② Apply a thin film of oil to the
O-ring of a new cartridge and
inst al l the new c art ri dge by
tightening it with a hand. When
its packing touches the sealing
surface,
turn it approx. 2/3 turns
further with a wrench.
③
Put the engine oil to the speci-
fied level. in new oil filter car-
tridge.
►
T39O512A
pliers
T39O513A
Replacing engine
oil filter cartridge
To Next Page
Loading...
