CHECKING AND ADJUSTING
FAN BELT
Check and adjust the fan belt's ten-
sion periodically.
① Unscrew the alternator mounting
bolt slightly and move the alterna-
tor to adjust the tension.
②
Check the belt's tension. Press
the middle of the belt with about
10kg of force. It is okay when the
belt is deflected about 0~15mm.
③
Replace the belt if it is crocked or
frayed.
④ Replace the belt if tegument is worn
out or some pieces are detached.
►
T254O525B
Mounting bolt
Fan belt
0~15 mm
FUEL HOSE CHECKING
Check the fuel hose as follows :
①
Stop the engine. After the engine
is sufficiently cooled down, open
the hood.
② Check if the fuel hose is dam-
aged or leaks. Replace it if nec-
essary.
③ Tighten the clamp.
►
A I R C L E A N E R H O S E
CHECKING
Check the air cleaner hose as fol-
lows :
①
Stop the engine. After the engine
is sufficiently cooled down, open
the hood.
② Check if the air cleaner hose is
damaged or leaks. Replace it if
necessary.
③ Tighten the clamp.
►
T4NO505A
Clamp
Air cleaner hose
Fuel hose
Clamp
T4NO509A
Fuel hose
To Next Page
Loading...
