INDEPENDENT PTO
OPERATION SWITCH
(1) Operation of PTO selection
switch
「OFF」- The PTO shaft is stopped.
「Automatic」
W
hen the implement is lifted to
the preset height, the PTO shaft
is automatically stopped.
「Manual」-
T
he rotating status of the PTO
shaft can be controlled by operat-
ing the PTO ON/OFF switch to
the ON/OFF position manually.
►
(2) Operation of PTO ON/OFF
button switch
Operation for 'automatic' and 'man-
ual' positions of the PTO selection
switch is as follows :
「ON」
W
hen pressing the switch, the
red lamp comes on and the PTO
shaft rotates.
「OFF」
When pressing the switch again,
the lamp goes off and the PTO
shaft stops rotating.
T4HO220B
PTO ON/OFF
Switch
T4NO219A
To Next Page
Loading...
