Ultimaker 2 Extended User Manual

7
SPECIFICATIONS
Printing
Print technology Fused Filament Fabrication
Build volume 223 mm / 223 mm / 305 mm
Layer resolution Fast: 200 micron (0.2 mm)
Normal: 100 micron (0.1 mm)
High: 60 micron (0.06 mm)
Ulti: 40 micron (0.04 mm)
Position precision 12.5 micron / 12.5 micron / 5 micron
Filament diameter 2.85 mm (generally known as 3 mm filament)
Nozzle diameter 0.4 mm
Print speed 30 mm/s - 300 mm/s
Travel speed 30 mm/s - 350 mm/s
Software
Supplied software Cura - Ocial Ultimaker Software
File types STL / OBJ / DAE / AMF
Supported OS Windows / Mac / Linux
Electrical
AC Input 100 - 240 V
Approx. 1.4 AMPS
50 - 60 Hz
221 Watt max.
Connectivity Stand-alone SD card printing / WiFi printing ready
Physical dimensions
Desktop space 357 mm / 342 mm / 488 mm
Shipping dimensions 400 mm / 400 mm / 650 mm
Weight 12.0 kg
Shipping weight 21.0 kg
Temperature
Ambient operation temperature 15 - 32 °C
Storage temperature 0 - 32 °C
Nozzle operation temperature 180 - 260 °C
Heated bed operation temperature 50 - 100 °C
Sound
Average operational noise 49 dBA
CAUTION: The Ultimaker 2 Extended generates high temperatures and has hot moving parts that can cause injury.
Never reach inside of the Ultimaker 2 Extended while it is in operation. Always control the Ultimaker 2 Extended
with the button on the front or with the power switch on the back. Allow the Ultimaker 2 Extended to cool down for 5
minutes before reaching inside.
CAUTION: When opening the Ultimaker 2 Extended for service, ensure that the power supply is turned o and the
power cable is disconnected from the wall socket.
CAUTION: Only use the power supply provided with your Ultimaker 2 Extended.

Ultimaker 2 Extended Specifications

General

Brand	Ultimaker
Model	2 Extended
Category	3D Printers
Language	English