Ultimaker S7 - Flexible Build Plate Maintenance Instructions

EN UltiMaker S7 Installation and user manual 31
5.4 Flexible build plate maintenance instructions
Keepthesurfaceoftheexiblebuildplatecleanforthebestresults.Cleanthesurfaceoftheexiblebuildplate
usinga(microber)clothand>95%isopropylalcohol(IPA).Alwayslettheplatecooldownbeforecleaning.
IPA(CASnr.67-63-0)isahazardous,highlyammablesubstance.Keepawayfromheat,sparks,static
discharge, and other potential ignition sources. Ensure good ventilation and avoid inhaling vapor. Read the SDS
from your IPA supplier to learn more about the risks and safety precautions.
Do not use other cleaning agents, such as acetone, petrol, or thinner for cleaning. This will permanently
damagethesurfaceoftheexiblebuildplate.
Donotcleantheexiblebuildplatewithwater.Thoroughlydrytheplatewitha(microber)clothifithascome
into contact with water.
Donotusescouringpadsorothertoolsthatmayscratchthesurfaceoftheexiblebuildplate.
Formoreinformationabouttheexiblebuildplate,includinghandlingandmaintenance,goto
ultimaker.com/explate.