Ultra electronics Magicard Pronto - Choosing the Right Dye-Film

Ultra Electronics Ltd
Magicard Pronto User Manual
- 14 -
CHOOSING THE RIGHT DYE-FILM
The Table below is a guide to selecting the best Dye-Film to use for any intended application.
Note :
 MA300YMCKO Dye-Film is generally the appropri
ate choice for colour printing with the
Pronto.
 MA1000K & MA600KO Dye-Film – where running costs ar
e critical, monochrome printing is
a fraction of the cost of colour printing.
Printer
model
Type of images you
want to print
Cards per
Ribbon
Ribbon
Panel
Layout
*
Part Number
Pronto Colour (1 side only) 300 (printing on 1 side only) YMCKO MA300YMCKO
Pronto
Monochrome:
Black
Red
Blue
Green
Gold
Silver
White
Scratch
1000 (printing on 1 side only) K
MA1000K-n
(n = colour)
Pronto Black + Overcoat 600 (printing on 1 side only) KO MA600KO
* Ribbon Panel Layout Key: Y=yellow, M=magenta, C=cyan, K=resin, O=overcoat (No Colour)