Ultra electronics Magicard Pronto - Install the Dye-Film; Connect the Power Supply

Ultra Electronics Ltd
Magicard Pronto User Manual
- 7 -
Install the Dye-Film
• Rem
ove the Dye-Film from it’s pa
ckaging.
• Place the loaded spool into the rear slots
and the take-up spool into the front slots.
• Close the Printer.
Connect the Power Supply
Select the correct adapter for your region an
d connect to Power Supply
unit. Plug in and connect to Printer (which will automatically switch on).
IM
PORTANT : Do not connect th
e USB until the CD ROM has been
installed.