Optimized Operating Software
B6 mini features the AUTO function that set the feeding current during
the process of charging or discharging. Especially for lithium batteries, it
can prevent the overcharging which may lead to an explosion. It can
disconnect the circuit automatically and alarm once detecting any
malfunction. All the programs of this product were controlled through
two way linkage and communication, to achieve the maximum safety
and minimize the trouble. All the settings can be configured by users!
Internal Independent Lithium Battery Balancer
B6 mini employs an in dividual-cell-voltage balancer. It isn't necessary
to connect an external balancer for balance charging.
Balancing Individual Cells For Battery Discharging
During the process of discharging, B6 mini can monitor and balance
each cell of the battery individually. Error message will be indicated and
the process will be ended automatically if the voltage of any single one
cell is abnormal.
Adaptable to Various Type of Lithium Battery
B6 mini is adaptable to various types of lithium batteries,such as LiPo,
Lilon, LiFe and new generation of LiHV batteries.
Fast and Storage Mode of Lithium Battery
Purposes to charge lithium battery varies, 'fast' charge reduce the
duration of charging, whereas 'store' state can control the final voltage
of your battery, so as to store for a long time and protect useful time of
the battery.
Cyclic Charging/Discharging
1 to 5 cyclic and continuous process of charge>discharge or discharge
> charge is operable for battery refreshing and balancing to stimulate
the battery's activity.
SPECIAL FEATURES
6
To Next Page
Loading...
Need help?
General
