Ulvac DPG-30R - DC Power Supply and Controller Isolation Bushings

DC Power Supply [DPG-30R & DPG-MC60R, DPG-MC120R, DPG-MC240R]
3. Setup
26
3-3-4. DC power supply and controller isolation bushings
When mounting the DC power supply and the controller in a rack, isolate the controller from the
rack by attaching isolation bushings as shown in Figures 3-9 and 3-10. Isolate the power supply
from the rack in the same manner.
Figure 3-9 Isolation bushing attachment positions (DC power supply)