Amplitude, maximum, minimum, top, bottom, mean, peak-to-peak, amplitude,
average, root mean square, cycle root mean square, area, cycle area,
frequency, cycle, rising edge, falling edge, positive pulse, negative pulse, burst
pulse, overshoot, preshoot, duty ratio, negative duty ratio, positive duty ratio,
delay (advance measurement), phase (advance measurement)
Voltage difference V) between cursors time
difference T) between cursors
time difference ( T) countdown (Hz) (1/ T)
Cursor display is enabled during automatic measurement
10 groups of waveforms and 10 setups
Hanning, Hamming, Blackman, Rectangle
To Next Page
Loading...
Need help?
General
