Table 2-6a Explanatory notes for the REF menu (1)
Table 2-6b Explanatory notes for the REF menu (2)
Select as the reference waveform
Select as the reference waveform
Recall waveforms stored in 10 positions then select one with the
control knob Press the control knob to
To display the amplitude and time base contents of the current
Use the control knob to move the waveform
Use the control knob to adjust the vertical
Close the reference waveform
Enter the USB menu (see Table 2-7), recall the reference
waveform stored on the USB device
To Next Page
Loading...
