UNI-T UTD4000 Series - Page 54

45
UTD4000 Four-channel
User Manual
Table 2-14 Video Setup
When PAL is selected for video and synchronization
mode is line, you will see a screen display as shown in
Figure 2-16. When synchronization mode is field, you
will see a screen display as shown in Figure 2-17.
Function Menu
Setup
Explanatory Note
Standard
PAL
NTSC
Suitable for PAL video signals
Suitable for NTSC video signals
Sync
Set the video odd field to synchronized trigger
Set the video even field to synchronized trigger
Set the line signal to synchronize with trigger
Set synchronized trigger on the specified line and adjust by
turning the control knob lines for PAL
lines for NTSC
MULTIPURPOSE
: ;
625
525
Odd Field
Even Field
All lines
Line Num
Back
Return to video trigger menu
Figure 2-16 Video trigger : Line synchronization