Table 2-26 Utility menu 1
Run auto system calibration
Display information like oscilloscope model, version and serial
Clear all saved reference waveforms and setups
Enter date and time setup. See Table 2-
Restore factory setup. See Appendix D
Set the auto function. See Table 2-
Return to the Utility menu
Select your desired languages with the
control knob and then press the control
Classical, Traditional, Modern
Set the waiting time for automatic menu shutoff s s s
and manual Manual means automatic shutoff is disabled
Press to turn it on or off
Adjust the brightness of the display grid with the
Return to the Utility menu
Set waveform recording operation
To Next Page
Loading...
Need help?
General
