PERIODIC INSPECTION
4-26
REPLACING ENGINE OIL FILTER ELEMENT
CAUTION
•
See “AFTER ENGINE HAS STARTED” on page 3-5.
•
Use engine the same brand of oil as being used.
OIL FILTER
Replace the two cartridge lter elements with new ones.
To install new elements, apply a small amount of engine oil on
the “O”-ring of each new element and tighten the element with a
lter wrench. After the seal comes in contact with the base, give
another 3/4 to 1 turn to the element.
To Next Page
Loading...
