UniCarriers FD160-2 - Page 137

PERIODIC INSPECTION
4-38
POWER TRAINS
Checking
item
Service Required Tools Daily
Monthly
(200 hrs)
Trimonthly
(600 hrs)
Semiannually
(1200 hrs)
Annually
(2400 hrs)
Torque
converter/
transmission
Check for oil leaks. Visual
○ ○ ○ ○ ○
Check oil level. Visual
○ ○ ○ ● ●
Check shift lever for operation and looseness. Operate
○ ○ ○ ○ ○
Check control valve and clutch for operation. Operate
○ ○ ○ ○ ○
Check inching valve for operation. Operate
○ ○ ○ ○ ○
Change inline lter element. Operate
● (rst time
only)
● ●
Propeller shaft Check for looseness and loose mounting bolt.
Touch and
test hammer
○ ○ ○
Differential
and nal
reduction gear
Check for oil leaks. Visual
○ ○ ○ ○ ○
Check oil level. Visual
○
○ ( ● rst
time only)
● ●
Check for deformation, cracks or damage. Visual
○ ○ ○ ○
Check for loose mounting bolt. Test hammer
○ ○ ○ ○
STEERING SYSTEM
Checking
item
Service Required Tools Daily
Monthly
(200 hrs)
Trimonthly
(600 hrs)
Semiannually
(1200 hrs)
Annually
(2400 hrs)
Tires
Check ination pressure. Tire gauge
○ ○ ○ ○ ○
Check for cracks or damage. Visual
○ ○ ○ ○ ○
Check tire tread for proper depth. Depth gauge
○ ○ ○ ○ ○
Check for undue wear. Visual
○ ○ ○ ○ ○
Check for debris, stones, or foreign matter in tread. Visual
○ ○ ○ ○ ○
Hub, rim
mounting bolt,
nut
Check for looseness. Test hammer
○ ○ ○ ○ ○
Check for damage. Visual
○ ○ ○ ○ ○
Rim, side ring Check rim, side ring, and disk wheel for damage. Visual
○ ○ ○ ○ ○