UniCarriers FD160-2 - Page 35

PARKING
1-30
Remove the key from a faulty truck and put up a sign
Do not operate
Remove the starter key and attach a sign saying DO NOT
OPERATE.
When leaving the truck, observe the following
conditions:
1) Park the truck on an out-of-trafc area and lower the forks on
the ground.
2) Tilt the mast a little forward and make the fork tips in contact
with the ground surface.
3) Apply the parking brake.
Engine-powered trucks
4) Place the shift levers (direction and speed range) in neutral.
5) Turn the key switch to the OFF position to shut off the engine.
6) Remove the key.
Electric trucks
4) Place the directional control lever in neutral.
5) Turn the key switch OFF.
6) Remove the key.