INSTRUMENTS AND CONTROLSINSTRUMENTS AND CONTROLS
2-52-5
INSTRUMENT PANELINSTRUMENT PANEL
This section explains the operation of the instrumentThis section explains the operation of the instrument
panel.panel.
Turn the key switch to the “ON” position.Turn the key switch to the “ON” position.
PPASSWORD INPUT ASSWORD INPUT SCREENSCREEN
If the truck is password-protected, this screen is shownIf the truck is password-protected, this screen is shown
on the instrument panel when the key switch is turnedon the instrument panel when the key switch is turned
to “ON”.to “ON”.
The truck won’t to operate unless the specied 4-digitThe truck won’t to operate unless the specied 4-digit
password is entered password is entered properlyproperly..
For the procedure for canceling the current password,For the procedure for canceling the current password,
see page 2see page 2-1-11.1.
INITIAL SCREEN SHOWN WHEN KEY SWITCH ISINITIAL SCREEN SHOWN WHEN KEY SWITCH IS
TURNED TO "ON"TURNED TO "ON"
MAIN SCREEN 2 - 3 MAIN SCREEN 2 - 3 SECONDS AFTERSECONDS AFTER
The Main screen (which is usually shown duringThe Main screen (which is usually shown during
operation) appears. If there is something unusual in theoperation) appears. If there is something unusual in the
system, the error screen is shown.system, the error screen is shown.
WARNINGWARNING
If the error screen is shown on the instrumentIf the error screen is shown on the instrument
panel, contact your local panel, contact your local UniCarriers dealer.UniCarriers dealer.
(See the "TROUBLESHOOTING GUIDE" Section(See the "TROUBLESHOOTING GUIDE" Section
in 4. MAINTENANCE.)in 4. MAINTENANCE.)
BATTERY CHARGE LEVEL INDICATORBATTERY CHARGE LEVEL INDICATOR
The battery charge level indicator indicates the battery’sThe battery charge level indicator indicates the battery’s
condition of charge. If the battery charge level drops tocondition of charge. If the battery charge level drops to
overdischarge level (factory set to level 2 ), the frame ofoverdischarge level (factory set to level 2 ), the frame of
the indicator blinks.the indicator blinks.
NOTENOTE
The battery charge level indicator usually does notThe battery charge level indicator usually does not
quickly respond to the current operating status of thequickly respond to the current operating status of the
battery, because it reads and processes voltage databattery, because it reads and processes voltage data
of the battery that is in the “off” state.of the battery that is in the “off” state.
If the truck is used for traveling and load handlingIf the truck is used for traveling and load handling
continuously, the battery charge level indicatorcontinuously, the battery charge level indicator
cannot read voltage data from the battery, so that thecannot read voltage data from the battery, so that the
indicator might not indicator might not progress correctlyprogress correctly..
SYSTEM STARTSYSTEM START
To Next Page
Loading...
