Introduction
PG-E-Series | Version 2.15 3
1Introduction
You have made a good choice by purchasing the UNI-
CRAFT power generator.
Read the operating instructions carefully before
using the machine.
This is an important part and must be kept near the ma-
chine and accessible to every user.
The operating instructions inform you about the proper
commissioning, the intended use as well as the safe and
efficient operation and maintenance of the power gene-
rator.
In addition, observe the local accident prevention regula-
tions and general safety regulations for the area of use of
the power generator.
1.1 Copyright
The contents of these instructions are protected by copy-
right and are the sole property of Stürmer Maschinen
GmbH. Their use is permitted within the scope of the use
of the power generator. Any other use is not permitted
without the written consent of the manufacturer.
Passing on and copying of this document, exploitation
and communication of its contents are prohibited unless
expressly permitted. Violations will result in liability for
damages. We register trademark, patent and design
rights to protect our products, insofar as this is possible
in individual cases. We emphatically oppose any infrin-
gement of our intellectual property.
1.2 Customer service
Please contact your dealer if you have questions con-
cerning your generator or if you need technical advice.
They will help you with specialist information and expert
advice.
Germany:
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Repair service:
Fax: 0049 (0) 951 96555-111
E-Mail: service@stuermer-maschinen.de
Internet: www.unicraft.de
Spare part orders:
Fax: 0049 (0) 951 96555-119
E-Mail: ersatzteile@stuermer-maschinen.de
We are always interested in valuable experience and
knowledge gained from using the application which then
could be shared and be valuable to develop our products
even further.
1.3 Limitation of liability
All information and notes in these operating instructions
were summarised while taking applicable standards and
rules, the state-of-the-art technology and our long-term
knowledge and experiences into consideration.
In the following cases the manufacturer is not liable for
damages:
- Non-observance of the operating instructions,
- Inappropriate use
- Use of inexperienced staff,
- Unauthorised modifications
- Technical changes,
- Use of not allowed spare parts.
The actual scope of delivery may deviate from the expla-
nations and presentations described here in case of spe-
cial models, when using additional ordering options or
due to latest technical modifications.
The obligations agreed in the delivery contract, the gen-
eral terms and conditions as well as the delivery condi-
tions of the manufacturer and the legal regulations at the
time of the conclusion of the contract are applicable.
2 Safety
This section provides an overview of all important safety
packages for the protection of the operating personnel
as well as for safe and fault-free operation. Other task
based safety notes are included in the paragraphs of the
individual phases of life.
2.1 Symbol explanation
Safety instructions
The safety notes in these operating instructions are high-
lighted by symbols. The safety notes are introduced by
signal words which express the concern of the risk.
To Next Page
Loading...
