EasyManua.ls Logo

unicraft PG-E Series - Generator Safety Label Guide

unicraft PG-E Series
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6 PG-E-Series | Version 2.15
Safety
- The functions and circuits of the generator should be
known: Unexperienced persons should not be allo-
wed to use the generator.
- The machine must not be misused.
- When the machine is not in use, do not allow un-
authorized use by other persons; Provide the emer-
gency generator with blocking systems, remove the
ignition key, and/or lock the protective hood with
appropriate locks.
- Sufficient lighting at the workplace must be ensured.
The applicable standards in this regard must be ob-
served.
- Do not remove any guards and do not leave the ma-
chine running without suitable protection (sides and
housing) so as not to expose the user to danger.
- If these guards have to be removed (for main-
tenance or inspection), it is essential to switch off the
generator beforehand. This work may only be car-
ried out by qualified personnel.
- Never run the machine in rooms with potentially ex-
plosive atmospheres.
- In an emergency, do not use water to extinguish fi-
res, only special safety systems (powder fire extin-
guishers, etc.).
- If it is necessary to work next to the machine, it is
necessary to use hearing protection (headphones,
ear protectors, etc.).
2.6 Safety labels on the generator
The following safety labels and instructions are attached
to the generator (Fig. 1) and must be observed.
Fig. 1: Safety labels
ATTENTION!
Avoid direct body contact with fuel, motor oil and bat-
tery acid. In case of skin contact, wash with water
and soap and rinse thoroughly: do not use organic
solvents. In case of eye contact, wash with water and
soap and rinse thoroughly. If these liquids are inhaled
or swallowed, consult a doctor.

Related product manuals