14
4. The following
screen appears.
About Memory Back-up
Your UBC248CLT has a convenient memory back-up system. In the event of a power failure,
the scanner will retain channel information for an indefinite amount of time. Channel
information is stored in non-volatile memory.
Scanning Mode
Press SCAN. (When the scanner is first
turned on, it is automatically in Scan mode.)
Scanning automatically stops on any active
channel, except those channels locked out.
Bank Scanning
While scanning, you can select specific banks
to monitor. The bank numbers 1-5 appear in
the display as the active banks.
To deactivate a bank, press the bank number
on the keypad. The bank number on the screen
goes out.
.
To Next Page
Loading...
Need help?
General