Uniden Bearcat UBC 248CLT User Manual

20
To Set Delay in Scan Mode
1. Press SCAN.
2. When your scanner stops on a channel, press
DELAY. DLY appears in the display and
scanning resume 2 seconds after the transmission
ends.
To Set Delay in Manual Mode
1. Press MANUAL.
2. Select the channel you want using your keypad.
3. Press MANUAL again.
4. Press DELAY. DLY appears in the display. .
SEARCHLIMIT/ HOLD/
SEARCHLIMIT/ HOLD/
SEARCHLIMIT/ HOLD/
SEARCHLIMIT/ HOLD/

Uniden Bearcat UBC 248CLT Specifications

General

Brand	Uniden
Model	Bearcat UBC 248CLT
Category	Radio
Language	English