Uniden UBCD396XT User Manual

UBCD396XT
77
3. Select Search with Scan, then select Set Number Tag.
4. Enter the number tag you want to use for this search range.
To a custom search range:
1. Open the Search for... menu.
2. Select Edit Custom, then select the custom search range you want to assign
the number tag to.
3. Select Search with Scan, then select Set Number Tag.
4. Enter the number tag you want to use for this custom search range.
Assigning a CHNT
 You can assign CHNTs to channels even if the system does not have an
assigned SNT. However, without an SNT, you can only navigate to these
channels from within that system itself.
 CHNTs can be duplicated within their own system, but you will see a
warning when you create multiples.
 CHNTs can range from 0 to 999.
1. Open the Program System menu.
2. Select the system containing the channel you want to assign the number tag
to.
3. Select Edit Group, then select the channel group you want.
4. Select Edit Channel, then select the channel you want to assign the number
tag to.
5. Select Set Number Tag.
6. Enter the number tag you want to use for this channel.

Uniden UBCD396XT Specifications

General

Brand	Uniden
Model	UBCD396XT
Category	Scanner
Language	English