122
Handset
¤ . . . Use to select Settings OK Display & Keypad OK
Feature Key OK . . . then
Using the Functions key p. 87
Tones and signals
Call volume
You can set the volume of the earpiece, handsfree function and headset on 5 levels inde-
pendently of each other.
During a conversation
¤ Handset Volume . . . use to select volume Save . . . the setting is saved
In idle status
¤ Handset Volume Use to select what the setting is to apply for (Earpiece /
Speaker / Corded headset) Use to select the volume Save . . . The setting is saved
or
Automatic volume control
The phone is able to automatically adjust the volume of the receiver and ringtone to the
ambient volume. Here you can set the sensitivity with which the phone reacts to changes in
noise level (Very High, High, Medium, Low, Very Low).
Send Key A phone number previously entered from the
keypad (or selected in a call list or the directory)
is dialled.
Enable/disable: ¤ Activation: Use to select On or Off
Specify whether the Functions key is also locked when the keypad lock is enabled, or it stays
enabled:
¤ Keypad locked Use to select Key active or Key inactive
To select a function: ¤ Function . . . Use to select a function
Save the selection: ¤ Save
Changes are only saved permanently in Profile Personal.
¤ . . . Use to select Audio Settings OK Handset Volume OK Use
to select what the setting is to apply for (Earpiece / Speaker / Corded headset) Use to
set the volume Save
Crescendo is not set for the ringtone volume ( p. 123).
¤ . . . Use to select Audio Settings OK Smart Volume OK
Earpiece Volume / Ringtone Volume Edit
Enable/disable: ¤ Activation: Use to select On or Off
To Next Page
Loading...
Need help?
General