AC-5000 / 5100 User Guide 47
UNIONCOMMUNITY Co., Ltd. / 12F, Daemyung Valeon, 127, Beobwon-ro,
Songpa-gu, Seoul, 05836, Republic of Korea
TEL: +82-2-6488-3000 / FAX: +82-2-6488-3100 E-Mail :sales@unioncomm.co.kr
http://www.unioncomm.co.kr
authentication level of the relevant user is applied for the user whose 1:1
authentication level is not set to ‘0’ (using the authentication level of the terminal).
▶1:N Level
Authentication level used for 1:N Fingerprint Authentication. In case of 1:N
authentication, the authentication level by users is not set and therefore always based
on the authentication level of the terminal.
▶ Fake Finger Detect
It presets LFD level to prevent imitation fingerprint input. Pre-setting the LFD level to a
higher value tends to reinforce the function, preventing the input of imitation
fingerprints produced with rubber, paper, film, silicone, etc. But when inputting a real
fingerprint, it may not read well.
▶ Template type
It sets the type of the fingerprint template. In this setting, all the users are deleted,
and the terminal is rebooted. It selects one of the UNION, ISO_ Standard,
ISO_Extended (Default- UNION).
▶ Check Same FP
If checked ( ), is the function that, during registration, checks whether or not the
fingerprint is already registered to prevent overlapped registration of the same
fingerprint in another user ID.
The user can exit to the parent menu using the [ENT~] key to apply the changed values. Use
the [F4 (←)] key to cancel input during setting.
3.6.4. Language
Select ◆ [ENT~] [4. System] [4. Language] in the initial screen ◆, and the
following screen appears:
The user can exit to the parent menu using the [ENT~] key to apply the changed values. Use
the [F4 (←)] key to cancel input during setting.
※ Danish / Arvia / Persian languages are restricted by fonts, languages are shown in
English, and voices are replaced by their respective languages. Also, due to the
To Next Page
Loading...
Need help?
General
