Software Manual CWD 2005
___________________________________________________________________
48 Manual CWD2005.doc
Configuration example: On the connection board E/A external, the 3 remote digital
contact inputs; Start measurement, Start calibration and Start hold are connected to
terminal block number X3, on terminals 1 to 6. (See Chapter 10 for wiring details).
6.2.1.1.5. Display
Physical value and Unit are list fields. They determine the numerical display on the
user configurable display screen. In the example Wobbe Index, Calorific Value
Specific Gravity and pressures are displayed on screen.
To Next Page
Loading...
