Union Instruments CWD 2005 - 6.2.1.2.4. Store Basic Calibration; 6.2.1.2.5. Calibration Limits

Software Manual CWD 2005
___________________________________________________________________
52 Manual CWD2005.doc
6.2.1.2.4. Store Basic Calibration
Store basic calibration stores the last calibration to get a fix point for the calibrations.
The point is important to see the deviation at the next calibration and to have a
deviation limit for a signal if the limit hits a programmed limit.
6.2.1.2.5. Calibration Limits
Here it is possible to program limits for each value after a calibration to give a signal
if a deviation reaches this limit.