Software Manual CWD 2005
___________________________________________________________________
56 Manual CWD2005.doc
6.2.1.3.4. Load factory configuration
Load factory configuration loads the standard data input as supplied by the factory
or installed at the last service. If the customer has changed several menu items and
problems arise because of malfunction with the instrument, this key allows a return to
factory default by running the standard configuration as supplied by the factory
Note: Without a memory stick in the slot an error messag
.
6.2.1.3.5. Curve Data to CSV File
In this menu all data are exported as ASCI files. All 25 available data are exported in
one session in a CSV file. Excel can handle this file.
6.2.1.3.6. Hold Signal on..off
the maintenance or similar on or
off. All signals together are switched on or off.
To Next Page
Loading...