-116- © 2018 unitech Electronics Co., Ltd. All rights reserved.
unitech is a registered trademark of unitech Electronics Co., Ltd.
MS652 User’s Manual
4.3.6 Double Click Function
1. Double Click Function only works with USB cable disconnected. It is
uesd for USB drive connection/disconnection when USB cable is
connected.
2. Initial ON/OFF means BLE ON /OFF when MS652 power-on. There is no
beeper indicator for BLE connection/disconnection by double clicking.
BLE Switch function may be used to hide/unhide soft keypad for Android
device, the same as ‘iOS Soft Keypad’ for iOS device.
None*
iOS Soft Keypad
BLE Switch with Initial ON
BLE Switch with Initial OFF
To Next Page
Loading...
