Unitech MS920

105
•
••
•UPC-E
EAN/UPC - UPC number system - UPC-E - Enable (*)
<SW>4B5901
EAN/UPC - UPC number system - UPC-E - Disable
<SW>4B5900
•
••
•Re-encoding UPC-A, UPC-E, EAN-8
[leading character] [number system] [data] [check digit]
- Converts decoded data to other code formats.
- Transmission only takes into account the parameters available for the target
bar code format.
- Regular UPC-A has a transmitted number system equal to 0.
- To transmit the additional leading character (country code), select the "UPC-A
transmitted as EAN-13" option.
EAN/UPC - Re-encoding UPC-A, UPC-E, EAN-8 - UPC-A transmitted as
EAN-13 (*)
<SW>4B5A01
EAN/UPC - Re-encoding UPC-A, UPC-E, EAN-8 - UPC-A transmitted as
UPC-A