<SW>674502
Keyboard settings - CAPS / NUM state - CAPS = ON / NUM = OFF
<SW>674503
Keyboard settings - CAPS / NUM state - CAPS and NUM = ON
<SW>674504
Data Transmission Settings
- Modify data transmission settings to optimize performance.
•
••
•ISCP
- Intermec Scanner Control Protocol parameters
ISCP - ISCP (*)
<SW>614001
Sending this parameter during online setup will lose the connection (click
"Connect" to reestablish the connection).
ISCP - None
<SW>614000
•
••
•Data format
- Barcode data is sent without a frame and no acknowledgement is necessary.
ISCP - Data format - Raw format (*)
<SW>734000
To Next Page
Loading...
