<SW>404C00
Codabar - Check digit - check digit verification - Enable
<SW>404C01
•
••
•Check digit transmission
- You can chose to transmit or not transmitted the check digit.
Codabar - Check digit - check digit transmission - Disable (*)
<SW>405400
Codabar - Check digit - check digit transmission - Enable
<SW>405401
•
••
•Barcode length
•
••
•Length mode
- Use the L1 as minimum length option if you know the minimum length of the
codes in your application!!!
- To optimize decoding performance and increase security, select the same
length as the minimum length in your application (do not select a shorter
length!!).
Length = [start] + [barcode data] + [check digit] + [stop]
- Minimum length possible = 3 characters.
- If the codes in your application have fixed lengths, use barcode length mode
To Next Page
Loading...
