Configuration Modes And
Utilities
Get version info.
Get firmware version
<STR>30C0
Get decode version info.
Get decode version
<STR>30C2
Get all component versions.
Get sub-system versions
<STR>30C4
Necessary for upgrade of product
firmware.
- Use the Intermec Firmware Download Wizard to upgrade your product
(available from the cd-rom or web, can be run from EasySet "Tools" menu if
installed in "download" subdirectory in EasySet directory).
- Reading this code prepares the product for firmware upgrade but inhibits
normal operation (restart the product to resume normal operation).
- Do not send this command directly from EasySet to your product - you must
read this command as a configuration code (send to the setup sheet and print
out)!
- See section 1 "Using EasySet" for details on how to connect up for firmware
To Next Page
Loading...
