•
••
•Check digit transmission
Plessey Code - Check digit transmission - Disable (*)
<SW>475400
Plessey Code - Check digit transmission - Enable
<SW>475401
•
••
•Unconventional stop
Plessey Code - Unconventional stop - Disable (*)
<SW>474300
Plessey Code - Unconventional stop - Enable
<SW>474301
•
••
•Barcode length
- Use the L1 as minimum length option if you know the minimum length of the
codes in your application!!!
- To optimize decoding performance and increase security, select the same
length as the minimum length in your application (do not select a shorter
length!!).
Length = [start] + [barcode data] + [2-character Check digit] + [stop]
- Minimum length possible = 5 characters.
Maximum length possible = 25 characters.
•
••
•Length mode
- L1 = Codes with as many characters as specified by L1 and longer are read
To Next Page
Loading...
