Unitech MS920 User Manual

54
Length = [barcode data] + [Check digit]
- Minimum length possible = 3 characters.
- compose 1 or 2 or 3 fixed lengths provides the best performance and security
if the codes in your application have fixed lengths
•
••
•Length mode
- L1 = Codes with as many characters as specified by L1 and longer are read
(L2 and L3 are not used).
- L2 = Only codes that comply with the lengths specified by L1, L2, and L3 will
be read.
- L3 = Codes at least the length specified by L1 and no longer than the
maximum length specified by L2 are read (L3 is not used).
Standard 2 of 5 - Barcode length - Length mode - L1 as Minimal length (*)
<SW>485300
Standard 2 of 5 - Barcode length - Length mode - L1, L2, L3 as fixed length
<SW>485301
Standard 2 of 5 - Barcode length - Length mode - L1 as min, L2 as max
<SW>485302
•
••
•Sweden Post
Sweden Post - Disable (*)
<SW>374000
Sweden Post - Enable

Unitech MS920 Specifications

General

Brand	Unitech
Model	MS920
Category	Scanner
Language	English